Sunday, June 28, 2009

Temperature Gauge Not Working Fix!

I found this fix from Brickboard.com. Something good to be extended to all. Click this for full details!


Good day :)

wbar8u652g

2 comments:

Unknown said...

Thanks alot for sharing your info.
I had an inop temp gauge on an 87
and concluded their was an open
circuit inside the cluster. My fix
was to cut the yellow wire at the
big connector (upper left) and
connect it directly to the back of
the gauge, the upper terminal.
I used 18 inches of small gauge wire
and a small ring terminal under the
gauge nut.

Ahmad Zhafri said...

Dee,

Thanks for the sharing!